Outside Temperature Sensor:
Command:





You can retreive old month records by running SBFSpot/SMASpot with commandline parameter -v -amXX,
where XX is the amount of months you would like to retreive, for example:
./SBFSpot -v -am12 , this will retreive up to 2 years from now.

This process can take a while, when pressing the above button, please wait until the dashboard is shown again!.

Settings

 (Seconds)
Apply Settings

Devices

ID Name Mac Address Status
Delete Unused Devices

Settings

 (Seconds)
 ()
Apply Settings
       
       
     
     
     
     
     
     

:
(Only for ProXL hardware devices!)



868.30MHz 868.30MHz FSK 868.35MHz 868.35MHz FSK 868.95MHz
         
     

You can only enable protocols for the same frequency!



Note: Any change will take effect after restarting Domoticz!


Hardware:


Meter 1:


Meter 2:


Meter 3:


Meter 4:


Meter 5:



Hardware:








Idx Name Enabled Type Address Port Data Timeout
Update    Delete

:
        



()
()





(etc. /dev/i2c-1, or empty for autodetection)

(decimal value)


 ()
Make sure the correct pin status is read by introducing a bounce delay.
 ()
Maximum of one interrupt per pin allowed in this period (prevents interrupt storms).
 

Auto configure devices:


For DAEnetIP2 boards password field must contain username:password. Example admin:admin


CRC message validation:
Using CRC message validation prevents incorrect data from entering the Domoticz database.
 Seconds 
This limits the amount of meter updates.
A high update rate could result in performance loss.

(Use only when your provider encrypts the payload)

Date/time synchronization:  Minutes
Minutes between date / time synchronization checks.



Poll inputs:
Poll relays:
Poll interval:   Seconds

Auto Discovery:
Alarm Inputs:
eHousePRO Enable:




City Name, City ID or Latitude,Longitude
 
 
 
  This will create 7 new devices (UV, Max Temp, Min Temp, Wind, Cloud, Precipitation, Rain/Snow) for each Forecast day and/or 4 devices for each hour.
And when 'forecast description devices' is enabled, 3 more devices per day/hour are created: Description, Icon and Name.
So 56(80) for forecasting 8 days and 192(336) for 48 hourly forecasts.
No need to activate these forecast settings if you just want to use the Forecast screen in the UI (will be fetched on the fly).
   

 ()
 (%)







  • If you enter an API key all the other fields are optional.
  • If you enter a Product Id, Secret and PIN but leave the API Key blank Domoticz will attempt to grab an API key from Nest using that information.
  • To obtain an API Key you will need to register with Nest. See the Domoticz Wiki (NestDeveloperApiKey) for more information.

Change only to select another Toon when having multiple agreements

 ()
 ().
Two interval types need to be specified:
  • Default interval is used when the car is not at home, or home but not charging or using climate controls
    Note that a too low interval (less than 20 minutes) will prevent the car to sleep.
  • Active interval is used when the car is home, and charging or using climate controls
If not allowed, the car will not be woken up when polled for status information to avoid battery drain. Exceptions:
  • Commands sent to the car will always wake up the car
  • While the car is connected to a charger (home or not home), the car will always be woken up
When user name and password do not work (e.g. Tesla changed the login API) you can provide a manual API key here
until it is fixed. There are various tools online available that can generate an API key.
Note that an API key has limited validity (usually one month).

 ()
 ().
Two interval types need to be specified:
  • Default interval is used when the car is not at home, or home but not charging or using climate controls
    Note: Mercedes Me does not support a 'sleep' state, so the default interval can be anything (> 2 minutes to prevent hitting limits).
  • Active interval is used when the car is home, and charging or using climate controls (not implemented at the moment)
For entering the Username/Password below:
  • Username : This should be [client_id]:[client_secret] as provided via the Developers Console from Mercedes.
  • Password: This should be a valid Oauth2 Authorisation code provided after completing the authorisation process.
  • (the code part of the localhost URL you have been redirected to.)



 (Seconds)
 
 

Leave the username empty and press the LINK button on the Philips Hue bridge. Then press the 'Register on Bridge' button.
Register on Bridge

 (Seconds)
Poll Inverters:
When enabled this will also collect individual inverter details.

ONLY enter this when using a Installer account. This is needed to check/set Power state. Otherwise leave empty!.

:

You need to sign up at Honeywell to get the API key and secret.
Please follow the instructions on domoticz.com/wiki/HoneywellDeveloperApiKey



Add extra parameteres to rtl_433 command line. You may for instance :
  • specify device number (if you have more than one) : -d 1
  • specify other frequencies and hop time : -f 433.92e6 -f 868.24e6 -H 60
Be careful not to conflict with the options affecting output.


If 'False' this will cause the MQTT message to be echoed back.
In most cases this is a bad scenario and should be avoided.
Select the Topic mode that Domoticz uses to send and receive messages.

  • MyMQTT (default) - domoticz/in/MyMQTT, domoticz/out/MyMQTT.
  • Gateway Node Name - domoticz/in/GatewayNodeName, domoticz/out/GatewayNodeName (GatewayNodeName is specified in the Name field above).
  • Custom Topics - Enter custom topic prefixes below.
← 
← 

 (Seconds)
This sets the interval between status requests.
If you set this to less than 60 seconds you may be in violation of Honeywell's usage terms and have your account suspended!
Synchronize installation:
When enabled this will automatically register and keep your zone names in sync with the Evohome controller.
Show schedule:
When enabled this will show the next scheduled switch point when in Auto (FollowSchedule) mode.
Show location: (implies synchronize installation)
 
, , (keep at [0,0,0] if you only have one Evohome installation)
 

Add

Settings

 ()